- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
ER14250+SPC1520 Super Pulse Cap 1200mAh Li/SOCI2 unchargable battery for IOT Sensor nodes.
Reference: DWM17112003
LSN50 - Waterproof Long Range Wireless LoRa Sensor Node is an open source product, it is based on the STM32Cube HAL drivers and lots of libraries can be found in ST site for rapid development.
Reference: DWM18101201
The OLG02 is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM19090402
The LPS8 is an open source LoRaWAN Gateway Build in SX1308 and SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM20033101
ER18505+SPC1520 Super Pulse Cap 4000mAh Li/SOCI2 unchargable battery for LSN50 Sensor nodes.
Reference: ODL23020605
The LWL03A is a LoRaWAN Water Leak Controller use a Water Leak Cable on the ground to detect water leakage. The water leak cable is sensitivity, when there is water over the leak cable.
Reference: DWM21010104
The LSN50v2-S31 is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
Reference: DWM21010101
LBT1 is a Long Range / low power consumption LoRaWAN Bluetooth tracker. LBT1 scans and find the nearest i-Beacon info and send to IoT server via LoRaWAN wireless network.
Reference: DWM20061503
The LDS01 is a LoRaWAN Door Sensor. It detects door open/close status and will send periodically data every day as well as for each door open/close action. It also count the door open times and calculate last door open duration.
Reference: ODL23103104
The SPH01-LB LoRaWAN Soil pH Sensor supports BLE configure and wireless OTA update for IoT of Agriculture it is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level IP68 waterproof.
Reference: ODL23110102
The DDS04-LB is a LoRaWAN 4-Channels Distance Sensor upports BLE configure and wireless OTA update for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: DWM20022602
The Dragino RS485-LN is a RS485 to LoRaWAN Converter. It converts the RS485 devices into LoRaWAN wireless network which simplify the IoT installation and reduce the installation/maintaining cost.
Reference: DWM25022702
The MDS120-NB is an NB-IoT Microwave Radar Distance Sensor that uses Microwave Radar to detect the distance between the sensor and different objects supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and uplinks to various IoT Servers.
Reference: ODL25011501
The D20-NB and D20S-NB NB-IoT Temperature Sensors convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: DWM14033102
Brand: Semtech
The RFM96W / RFM98W 433MHz,470MHz transceivers feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech chipset with the application for ARM meters.
Reference: ODL23103003
LSE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture supports BLE configure and wireless OTA update It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
Reference: DWM18073001
LG02-P is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: ODL25022201
The DDS45-LS solar-powered LoRaWAN ultrasonic distance sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve data reliability.
Reference: ODL22110601
The CPN01 is an NB-IoT Dry Contact Sensor. It detects open/close status and uplinks the info to IoT server via NB-IoT network is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
Reference: ODL25030203
PS-NB-T NB-IOT Thread Installation LoRaWAN Air /Water Pressure Sensor that can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the NB-IOT server.
Reference: DWM18121802
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
ER14250+SPC1520 Super Pulse Cap 1200mAh Li/SOCI2 unchargable battery for IOT Sensor nodes.