Reference: ODL23042103
The LHT65S-NE117 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor use an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.
Reference: ODL25022001
The SE01-NB uses the FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the NB-IoT IoT Server.
Reference: ODL23020605
The LWL03A is a LoRaWAN Water Leak Controller use a Water Leak Cable on the ground to detect water leakage. The water leak cable is sensitivity, when there is water over the leak cable.
Reference: ODL23031201
The LHT65N-E5 Temperature, Humidity & Illuminance sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external Illuminance sensor.
Reference: ODL22082602
The new A-fix Bracket Kit will help you easily install and optimally position your antennas for any use case scenario, to ensure the best coverage possible
Reference: ODL25032801
XT60 Multi-function charger adaptor with XT60 Plug to Female Tamiya, Dean, Futaba, TRX, XT60 male, EC3, JST and a free wire multi-function lead RC charger adaptor.
Reference: DWM20022603
LT-22222-L is The Dragino LT series I/O Modules are Long Range LoRa I/O Controller designed to simplify the installation of I/O monitoring.
Reference: ODL22052403
RAK8213 is a multi-band LTE Cat M1/Cat NB1/EGPRS module based on the Quectel BG96 with a standard PCI Express® form factor (Mini PCIe). It offers a maximum data rate of 375Kbps downlink and 375Kbps uplink.
Reference: ODL25022801
The DDS04-LS is a Solar-powered LoRaWAN 4-Channels Distance Sensor for the Internet of Things solution. It is capable of adding up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: ODL23020612
ESP32-S3 SX1262 WIFI BLE LoRa/ LoRaWAN Wireless Stick-V3 provides Wi-Fi, BLE, and LoRa solutions, which perfectly support Arduino®。 Users can easily carry out secondary development and application.
Reference: ODL24090104
The PS-LS-T sensors are powered by solar power + li-on battery with a Thread Installation Type Air Water Pressure sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: ODL22051801
The LHT65N is a Long Range LoRaWAN Sensor nodes with Temperature & Humidity sensor which external sensor connector can be used for more than 10 years.
Reference: ODL24082704
Air9000 DC Power Analyzer is a small handheld high-precision power consumption tester fully functional, precise, and reliable comparable to Keysight 6705C, and supports PC software.
Reference: ODL24090103
The PS-LS-I sensors are powered by solar power + li-on battery with an Immersion Installation Type Air Water Pressure sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: ODL23020603
RAK7431 is a Modbus RS485 to LoRaWAN® bridge designed for industrial applications. The device relays Modbus data using the LoRaWAN network as a means of wirelessly transmitting to and from the end devices.
Reference: ODL23110201
WSS-04 can monitor Rain or Snow event. RS485 interface connect to WSC1-L or WSC2-LB. which can detect and upload the SNOW/Rain Event to the IoT Server via wireless LoRaWAN protocol.
Reference: ODL23102004
The LDS12-LB LoRaWAN LiDAR ToF Distance Sensor supports BLE configuration and wireless OTA update be used in scenarios such as horizontal distance measurement, parking management system, object proximity, and presence detection.
Reference: ODL22071403
The GroPoint is a LoRaWAN Multi Soil Segment Converter It is designed to connect to GroPoint Profile Multi-depth Soil moisture and temperature profile Sensor for IoT of Agriculture.
Reference: ODL23091203
PS-LB-NA convert the Analog Value to LoRaWAN wireless data and send to IoT platform via LoRaWAN gateway. supports BLE configure and wireless OTA update.
Reference: ODL24122401
The NEO-M8N-0-10 was built with a NEO-M8U UDR module Output protocol NMEA-0183 with TTL Serial communication Support satellite GPS satellite, Beidou satellite, GLONASS satellite the module with an On-board ceramic passive antenna
Reference: ODL22072102
LA66 USB LoRaWAN Adapter which can easy to add LoRaWAN wireless feature to PC / Mobile phone or an embedded device that has USB Interface. It combines a CP2101 USB TTL Chip and LA66 LoRaWAN module.
Reference: ODL23092602
D22-LB is a LoRaWAN Temperature Sensor with 2 x DS18B20 based on the LSN50V3 or SN50V3-LB, supports BLE configuration, and wireless OTA update.
Reference: ODL23092705
UV254-LB is a LoRaWAN UVC Radiation Sensor is designed for detecting the intensity of ultraviolet lamps UVC is harmful to human health and to know UVC lamp is operate efficacy and make sure it won't work in unexpected time.
Reference: ODL22122701
The BCN02 is a Bluetooth BLE iBeacon designed for indoor positioning solution. BCN02 is base on Diglog IC and support Bluetooth 5.1 protocol.
Reference: ODL23020803
RFM119B is a RF module with which +20dBm high power and high performance thus to support 127 to 1020 MHz frequency, OOK, (G) FSK modulation.
Reference: ODL25022201
The DDS45-LS solar-powered LoRaWAN ultrasonic distance sensor is a module that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve data reliability.
Reference: ODL23102002
The MDS120-LB supports BLE configuration and wireless OTA updates more reliably in a condensation / dusty environment to detect the distance between the sensor and different objects.
Reference: ODL25030701
The nRFLR1262 module integrates the Nordic nRF52840 microcontroller and the Semtech SX1262 LoRa transceiver chip supports Bluetooth 5.3 and low-power Bluetooth and LoRaWAN 1.0.3 specification. It also supports the LoRa point-to-point (P2P) communication mode.
Reference: ODL25022501
The LDS12-LS is a Solar-powered LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor that supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: ODL24082901
SN50V3-LS Solar Powered LoRaWAN Sensor Node. It is designed for outdoor use and powered by a solar panel + Li-ion battery for long-term use. It supports BLE configuration and wireless OTA updates.
Reference: ODL25011303
WSS-09 9 in 1 Sensor for Dragino WSC2-l Weather Station solution measures the below values: Wind Speed, Wind Direction, Temperature, Humidity, Air Pressure, Illumination, PM2.5, PM10, Noise & Rain Gauge.
Reference: DWM20072902
The LDDS75 LoRaWAN Distance Detection Sensor node is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
