Description:

The Air9000P is a fully functional, stable, and reliable small handheld high-precision power consumption analyzer that supports PC-side software. 

Features:

Powered through a USB-C interface for measuring the voltage and current of low-power devices.

Suitable for battery-powered products, supporting specified voltage output (0~5V).

Supports current limiting output, allowing for setting any current limiting value within the range of 0~2A.

The current measurement range of 0~2A with a measurement accuracy of ±0.1% ±3 digits and a minimum resolution of 0.1μA.

Voltage measurement range of 0~5V with a measurement accuracy of ±0.1% ±3 digits and a minimum resolution of 1mV.

OCP overcurrent protection automatically limits the current output to below 1.5A in case of a circuit short-circuit.

Multiple-channel synchronous current sampling with no shift delay, a sampling rate of up to 10KHz to meet low-power testing requirements.

Connectable to PC-side software for viewing and analyzing current waveforms, catering to power consumption testing needs of cellular modules, Bluetooth chips, Wi-Fi chips, etc.

Command-line tools are available for capturing serial port data on any device (Win/Linux/Mac) and importing it for viewing using PC-side software.

Power Source Function:

Voltage output: 0~5V

Adjustable voltage: 1mV

Current limit: 0~2A

Adjustable current: 0.1μA

Maximum power: 10W

Power supply mode: 4.5V~5.5V

Tester Function:

Voltage Range: 05V

Voltage Accuracy: 1mV

Current Range: 02A

Current Accuracy: 0.1μA

Maximum Power: 10W

Power Supply: USB-C/5V

Hardware Sampling Rate: 100KHz

Host Computer Sampling Rate: 10KHz

Host Computer Software: Windows 7 and above

API Interface: Open dynamic library API interface

Additional specifications include:

Maximum measurement ranges Maximum voltage of 5V with a minimum resolution of 1mV; maximum current of 2A with a minimum resolution of 0.1μA.

Maximum measurement accuracy: Utilizes a high-precision reference chip, 12-bit ADC design, and default factory calibration, with accuracy up to ±0.1% ±3 digits.

Current measurement range: Current display ranges of 200μA, 20mA, and 2A, automatically switching based on the current being tested.

Gear switching speed: Air9000P employs multi-channel synchronous sampling with no gear shifting delay.

Voltage drop switching speed: Air9000P uses 2/3 channel sampling resistors with a maximum delay of 100μs when the sampling resistor is shorted.

Current measurement accuracy: Resolution of 0.1μA in the 200μA range, 10μA in the 20mA range, and more data can be found in the table below.

Package includes:

1x Air9000P

1x USB-A2C cable

2x Alligator clips

Useful Link:

PC Software Download

Gitee iot-power dll/so