Product Description
This kit is a GPS tracker with a sensor to detect location change every set time interval. Optional battery backup ( battery not included ) with solar panel built-in on the enclosure is used for recharging to ensure uninterrupted data transmission. Possible applications are tracking of cargo, vehicles, and vessels for marine traffic.
Setup: Localization data are acquired with a GPS module and the location information is sent to a LoRaWan® server when the sensor changes location.
This product includes a mounting plate with a highly optimized integrated antenna for BLE and LoRaWAN. Please follow our mounting guide for the correct connection of the antennas to the WisBlock Core module.
Note: If a non-rechargable battery is used with WisBlock Base Board it has to be unplugged before connecting the USB cable to the port on the board in order to configure the device. Not doing so might damage the battery and cause damage to the battery and board.
Application
This kit is a LoRa® -based GPS Tracker with Solar Panel.
This kit is a GPS tracker with a sensor that can be used to detect the change of location for a set time interval. Use this kit for tracking and monitoring cargo, vehicles, and marine vessels. The localization data acquired using the GPS module and the location information is sent to a LoRaWAN server when the sensor changes location.
This kit is encased in the IP65 WisBlock Unify Enclosure with the option to connect a battery, which can be recharged with the included solar panel. This is to make sure that data transmission is not interrupted. Please take note that the battery is not included in the package due to strict shipping regulations.
Key Features
RAK19007
Easy Plug'n'Play slots for WisBlock Core MCU, WisBlock Sensor, and WisBlock IO modules
Small form factor
Supports 3 different power supply sources
Optimized for low power consumption applications
I2C, UART, GPIO's an analog input accessible with solder contacts
2 user-definable LED's
Reset button
USB debug port
1 slot for WisBlock Core MCU
4 slots for WisBlock Sensor sensor modules
1 slot for WisBlock IO extension modules
RAK4631
LoRaWan®1.0.2 protocol stack (supports Class A & C)
Bluetooth Low Energy 5.0 protocol stack
Nordic nRF52840
Wide range of connections
Semtech SX1262
RAK1904
Using the ST LIS3DH acceleration sensor
Low power consumption
Small form factor
User-selectable scales of ±2g/±4g/±8g/±16g
Data acquisition rates from 1Hz to 5.3kHz.
Internal buffer for 32 levels of 16-bit data
RAK12500
Using the very accurate GNSS Module：U-Blox ZOE-M8Q chirp
GPS,GLONASS,QZSS and BeiDou Satellite support
Location Accuracy of ±2.5 meter
10Hz update rate
Velocity Accuracy ±0.05 m/s
Serial and I2C communication to WisBlock Core support
29 seconds Location Fix from Cold Start,1second from Hot Start
Unify Enclosure IP67 100x75x38mm
Mounting Accessories (order separate)
Unify Pole Mounting Vertical Kit (Type A)
Unify Wall Mounting Kit (Type D)
Unify Belt Clip Kit (Type E)
Unify DIN Rail Mounting Kit (Type F)
Unify Magnet Mounting Kit (Type G)
Unify Belt Loop Kit (Type H)
Unify Label Kit (Type I)
Unify Hook Loop Kit (Type J)
Package include
RAK19007
RAK4631
RAK1904
RAK12500
Unify Enclosure IP67 100x75x38mm
LoRa Antenna
BLE Antenna
GPS Antenna
Useful Link:
