- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
The MDS120-NB is an NB-IoT Microwave Radar Distance Sensor that uses Microwave Radar to detect the distance between the sensor and different objects supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and uplinks to various IoT Servers.
The Dragino MDS120-NB is an NB-IoT Microwave Radar Distance Sensor for the Internet of Things solution. It uses use Microwave Radar to detect the distance between the sensor and different objects. Different from ultrasonic or Lidar measurement. Microwave Radar is more reliable for condensation / dusty environments. It can sense the correct distance even if water or dust is on top of the sensor.
The MDS120-NB can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
MDS120-NB supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and uplinks to various IoT Servers.
MDS120-NB supports BLE configure and OTA update which make users easy to use.
MDS120-NB is powered by an 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
MDS120-NB has an optional built-in SIM card and default IoT server connection version. Which makes it work with a simple configuration.
NB-IoT Bands: B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 @H-FDD
Ultra-low power consumption
60Ghz Microwave Radar for distance detection
Measure Range: 15 ~ 1200cm
Accuracy: ±(2cm+SX0.3%). S: Measure Value
Measurement Angle: 25 degrees horizontal and 23 degrees vertical
Multiply Sampling and one uplink
Support Bluetooth v5.1 remote configure and update firmware
Uplink on periodically
Downlink to change configure
8500mAh Battery for long-term use
Nano SIM card slot for NB-IoT SIM
Supply Voltage: 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
Measuring Method: FMCW
Frequency: 60 GHz
Measure Range: 15 ~ 1200cm
Accuracy: ±(2cm+SX0.3%). S: Measure Value
Resolution: 1cm
Measurement Angle: 25 degrees horizontal and 23 degrees vertical
NB-IoT Module: BC660K-GL
B1 @H-FDD: 2100MHz
B2 @H-FDD: 1900MHz
B3 @H-FDD: 1800MHz
B4 @H-FDD: 2100MHz
B5 @H-FDD: 860MHz
B8 @H-FDD: 900MHz
B12 @H-FDD: 720MHz
B13 @H-FDD: 740MHz
B17 @H-FDD: 730MHz
B18 @H-FDD: 870MHz
B19 @H-FDD: 870MHz
B20 @H-FDD: 790MHz
B25 @H-FDD: 1900MHz
B28 @H-FDD: 750MHz
B66 @H-FDD: 2000MHz
B70 @H-FDD: 2000MHz
B85 @H-FDD: 700MHz
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
STOP Mode: 10uA @ 3.3v
Max transmit power: 350mA@3.3v
Horizontal distance measurement
Liquid level measurement
Parking management system
Object proximity and presence detection
Intelligent trash can management system
Robot obstacle avoidance
Automatic control
Sewer
Bottom water level monitoring
MDS120-NB NB-IoT Microwave Radar distance sensor x 1
External antenna x 1
Part Number: MDS120-NB-XX
XX:
GE: General version ( Exclude SIM card)
1T: with 1NCE * 10 years 500MB SIM card and Pre-configure to ThingsEye server
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: ODL23102002
The MDS120-LB supports BLE configure and wireless OTA updateis more reliable for condensation / dusty environment to detect the distance between sensor and different objects.
Reference: ODL25022601
The MDS200-LS is a solar-powered LoRaWAN Microwave Radar distance sensor. It uses a 24Ghz Microwave to detect the distance between the sensor and different objects. Microwave Radar is more reliable for condensation / dusty environments than ultrasonic or Lidar measurement methods.
Reference: ODL25022701
The MDS120-LS is a Solar-powered LoRaWAN Microwave Radar distance sensor that uses a 60Ghz Microwave Radar for distance detection with a Measure Range: of 15 ~ 1200cm.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM18103003
USD17/pcs MOQ100pcs DWM-HE designed by Dragino is a minimal system which installed with OpenWrt Linux system and support 150M 2.4G WiFi. It is compatible with 802.11b/g/n.
Reference: ODL23091201
The SW3L-LB is a new LoRaWAN Outdoor water Flow Sensor supports BLE configure and wireless OTA update which use to detects water flow volume and uplink to IoT server via LoRaWAN network it can be used at indoor and outdoor use.
Reference: ODL25030301
The DS03A-LS is a Solar-Powered LoRaWAN Door Sensor It detects the door open/close status and uplinks to the IoT server via the LoRaWAN network. Users can see the door status, open duration, and open counts in the IoT Server.
Reference: ODL25022402
The DDS20-NB is an NB-IoT Ultrasonic liquid-level sensor that supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and supports uplinks to various IoT Servers.
Reference: ODL23103002
The PS-LB-T or PS-LB-I sensors are LoRaWAN Pressure Sensors for the Internet of Things solution. PS-LB can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: ODL24090102
RS485-LS is a Solar Powered RS485/ UART to LoRaWAN Converter Users can connect the RS485 or UART sensor to the RS485-LS converter Supports BLE configuration and wireless OTA update.
Reference: ODL25022501
The LDS12-LS is a Solar-powered LoRaWAN LiDAR ToF (Time of Flight) Distance Sensor that supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: DWM25020701
The RS485-NB is an RS485 / UART to NB-IoT Converter for IOT applications that can read sensor data and upload via the NB-IoT network to the IoT server supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirement.
Reference: ODL22102001
The LHT65N-NE117 has an external probe uses TI TMP117A NIST traceability temperature sensor, with 0.1°C accuracy in normal temperature range.
Reference: ODL23103105
The LMS01-LB LoRaWAN Leaf Moisture Sensor Supports BLE configure and wireless OTA update for IoT of Agriculture it is designed to measure the leaf moisture and temperature to analyze the leaf status such as: watering, moisturizing, dew, frozen.
Reference: DWM21010104
The LSN50v2-S31 is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
Reference: ODL25022601
The MDS200-LS is a solar-powered LoRaWAN Microwave Radar distance sensor. It uses a 24Ghz Microwave to detect the distance between the sensor and different objects. Microwave Radar is more reliable for condensation / dusty environments than ultrasonic or Lidar measurement methods.
Reference: DWM17112001
IOT LoRa Gateway 4G Module is Quectel EC25 which is with Adaptor Board and used in the LG01-S and OLG01 IOT LoRa Gateway as bridge of 4G cellular wireless network.
Reference: DWM21031502
The DWM-AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM21051601
The LWL02 is a LoRaWAN Water Leak Sensor. It build in SX1262 can indicates a water leak event and uplink to IoT server via LoRaWAN network 2 x AAA batteries which can work in 2 ~ 10 years battery life.
The MDS120-NB is an NB-IoT Microwave Radar Distance Sensor that uses Microwave Radar to detect the distance between the sensor and different objects supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and uplinks to various IoT Servers.