All best sellers

PS-LB-I Immersion Installation Type LoRaWAN Air Water Pressure Sensor

ODL23103002

The PS-LB-I sensors are LoRaWAN Pressure Sensor for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.

Center frequency
Length
$160.00
Quantity

Description

The Dragino PS-LB-I sensors are LoRaWAN Pressure Sensor for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.

The PS-LB series sensors include  Immersion Type and Thread Installation Type (PS-LB-T), it supports different pressure range which can be used for different measurement requirement.

The LoRa wireless technology used in PS-LB-I allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

PS-LB-I supports BLE configure and wireless OTA update which make user easy to use.

PS-LB-I is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.

Each PS-LB-I is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

Features

LoRaWAN 1.0.3 Class A

Ultra-low power consumption

Measure air / gas or water pressure

Different pressure range available

Thread Installation Type or Immersion Type

Monitor Battery Level

Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

Support Bluetooth v5.1 and LoRaWAN remote configure

Support wireless OTA update firmware

Uplink on periodically

Downlink to change configure

8500mAh Battery for long term use

Controllable 3.3v,5v and 12v output to power external sensor

Specification

Micro Controller:

MCU: 48Mhz ARM

Flash: 256KB

RAM: 64KB

Common DC Characteristics:

Supply Voltage: 2.5v ~ 3.6v

Operating Temperature: -40 ~ 85°C

LoRa Spec:

Frequency Range,  Band 1 (HF): 862 ~ 1020 Mhz,Band 2 (LF): 410 ~ 528 Mhz

Max +22 dBm constant RF output vs.

RX sensitivity: down to -139 dBm.

Excellent blocking immunity

Current Input Measuring :

Range: 0 ~ 20mA

Accuracy: 0.02mA

Resolution: 0.001mA

Voltage Input Measuring:

Range: 0 ~ 30v

Accuracy: 0.02v

Resolution: 0.001v

Battery:

Li/SOCI2 un-chargeable battery

Capacity: 8500mAh

Self-Discharge: <1% / Year @ 25°C

Max continuously current: 130mA

Max boost current: 2A, 1 second

Power Consumption

Sleep Mode: 5uA @ 3.3v

LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

Thread Immersion probe sensor spec:

Immersion Type, Probe IP Level: IP68

Measuring Range: Measure range can be customized, up to 100m.

Accuracy: 0.2% F.S

Long-Term Stability: ±0.2% F.S / Year

Storage temperature: -30℃~80℃

Operating temperature: 0℃~50℃

Material: 316 stainless steels

Application:

Liquid & Water Pressure / Level detect.

Order Info:

Pls left a message with the cable length which out of the options. 

Useful Link:

Datasheet

User Manual

Firmware

Product Details
ODL23103002
100 Items
You might also like
16 other products in the same category:

Reference: ODL22110601

CPN01 Outdoor NB-IoT Open/ Close Dry Contact Sensor

The CPN01 is an NB-IoT Dry Contact Sensor. It detects open/close status and uplinks the info to IoT server via NB-IoT network is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.

Price $65.00
More
In stock

Reference: ODL23100701

LG01-V2 Open-source single channel LoRa IOT Gateway

LG01v2 uses Open Source Linux system design for peer to peer single channel LoRa protocol instead of LoRaWAN protocol,lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet or Cellular Network (via Optional 4G module).

Price $125.00
More
In stock

Reference: ODL23042102

LHT65S LoRaWAN Temperature&Humidity Sensor

The LHT65S Temperature &amp; Humidity sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature &amp; Humidity sensor and has an external sensor connector to connect to an external Temperature Sensor.

Price $38.00
More
In stock

Reviews

Write your review

PS-LB-I Immersion Installation Type LoRaWAN Air Water Pressure Sensor

The PS-LB-I sensors are LoRaWAN Pressure Sensor for Internet of Things solution. PS-LB can measure Air, Water pressure and liquid level and upload the sensor data via wireless to LoRaWAN IoT server.

Write your review

Follow us on Facebook