- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
RF Explorer - ISM Combo Handheld Digital Spectrum Analyzer is a very affordable tool for work in all ISM popular frequency bands.
RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all ISM popular frequency bands. It is based on a highly integrated frequency synthesizer which offers high performance, compact size, low consumption and low cost.
It has been designed to be used equally well outdoor and indoor, and can be connected to a PC for extra functionality using standard mini-USB 2.0 connector.
This model includes a WSUB1G baseline unit plus an RFEM2.4G Expansion Module conveniently assembled and tested. It comes with two SMA connectors and two antennas,a nice Nagoya NA-773 wideband telescopic antenna for Sub-GHz frequencies and a whip helical for 2.4GHz band.
Pocket size and light weight
Solid aluminum metal case
Spectrum Analyzer mode with Peak Max and Hold, Normal, Overwrite and Averaging modes
Lifetime free firmware upgrades available, open to community requested features
High capacity Lipo for 16hs+ of continuous run, rechargeable by USB
Windows PC client Open Source
Can be extended with internal Expansion Modules for additional band and functionality
Wide band coverage to all popular sub-1Ghz ISM bands and 2.4GHz band, including 315MHz, 433MHz, 868MHzand 915MHz, 2.4GHz WiFi, Zigbee, also including UHF TV, 70cm and 33cm HAM radio, GSM, etc. Any frequency from 240MHzto 960MHz and 2350MHz to 2550MHz is supported.
Note this unit does not include RF Generator functionality for the Sub-GHz band, only Spectrum Analyzer functionality is available for the Sub-GHz band. The 2.4GHz band includes standard RF Generator.
Frequency band: 240 - 960 MHz and 2.35 – 2.55 GHz
Frequency span: 112KHz - 100MHz
Graphics LCD 128x64 pixels, great visibility outdoors
PC Windows client supports Windows XP/Vista/Win7 both 32 and 64bits
Backlight for great indoor visibility
2 standard SMA 50 ohms connector, one for Sub-GHz wideband Nagoya NA-773 telescopic antenna included and another one for 2.4GHz band with helical antenna included.
Amplitude resolution: 0.5dBm
Dynamic range: -115dBm to 0dBm
Absolute Max input power: +5dBm
Average noise level (typical): -110dBm
2.4GHz RF Generator amplitude: -30dBm to +1dBm
Frequency stability and accuracy (typical): +-10ppm
Amplitude stability and accuracy (typical): +-3dBm
Frequency resolution: 1Khz
Resolution bandwidth (RBW): automatic 2.6Khz to 600Khz
Weight: 185g
Size: 113x70x25 mm
This product is designed by RF-Explorer, If you encounter any problems when using this product, please contact rfexplorer(at)arocholl.com for the technical support.
Weight | G.W 304.5g |
Battery | Lithium Cells / Batteries contained in equipment UN3481 - PI967 |
RF Explorer - ISM Combo | 1 |
Reference: DWM19070301
RF Explorer - ISM WSUB1G Handheld Digital Spectrum Analyzer is a very affordable tool for work in 240 - 960 MHz ISM popular frequency bands.
Reference: DWM19070302
RF Explorer - 915MHz V2.0 Handheld Digital Spectrum Analyzer is a very affordable tool for work in 915MHz ISM popular frequency bands.
Reference: DWM19070303
RF Explorer - 868MHz Handheld Digital Spectrum Analyzer is a very affordable tool for work in 850-880 MHz ISM popular frequency bands.
Reference: DWM19070305
RF Explorer - 433MHz Handheld Digital Spectrum Analyzer is a very affordable tool for work in 430-440MHz ISM popular frequency bands.
Reference: DWM19070304
RF Explorer -2.4GHz Handheld Digital Spectrum Analyzer is a very affordable tool for work in 2400-2485MHz ISM popular frequency bands.
Reference: DWM19070306
RF Explorer - 3G Combo Handheld Digital Spectrum Analyzer is a very affordable tool for work in 15-2700MHz ISM popular frequency bands.
Reference: DWM19070307
RF Explorer - WiFi Combo Handheld Digital Spectrum Analyzer is a very affordable tool for work in 2350-2550 MHz and 4850-6100 MHz ISM popular frequency bands.
Reference: DWM19070308
RF Explorer - 6G Combo Handheld Digital Spectrum Analyzer is a very affordable tool for work in 215-2700MHz and 4850-6100MHz ISM popular frequency bands.
Reference: ODL23103104
The SPH01-LB LoRaWAN Soil pH Sensor supports BLE configuration and wireless OTA update for IoT in Agriculture. It is designed to measure the soil PH and soil temperature to analyze the soil acid or alkali level. IP68 waterproof.
Reference: ODL25022503
The LDS40-NB NB-IoT LiDAR ToF Distance Sensor which is capable of measuring the distance to objects as close as 0m to 40m supports BLE configure and OTA update which makes users easy to use.
Reference: ODL25030203
PS-NB-T NB-IOT Thread Installation LoRaWAN Air /Water Pressure Sensor that can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the NB-IOT server.
Reference: ODL23103001
The PS-LB-T or PS-LB-I sensors are LoRaWAN Pressure Sensors for the Internet of Things solution. PS-LB can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: DWM18101201
The OLG02 is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular.
Reference: DWM21010104
The LSN50v2-S31 is a LoRaWAN Temperature and Humidity Sensor for Internet of Things solution. It is used to measure the surrounding environment temperature and relative air humidity precisely, and then upload to IoT server via LoRaWAN wireless protocol.
Reference: ODL22082507
The LDDS45 is a LoRaWAN Distance Detection Sensor which is usedultrasonic sensing technology for distance measurement for Internet of Things solution.
Reference: ODL23092602
D22-LB is a LoRaWAN Temperature Sensor with 2 x DS18B20 based on the LSN50V3 or SN50V3-LB, supports BLE configuration, and wireless OTA update.
Reference: DWM19090401
The Dragino LHT65 Temperature & Humidity sensor is a Long Range LoRaWAN Sensor with an external sensor connector can be used for more than 10 years.
Reference: DWM18051402
Brand: Semtech
HPD14A SX1278 433MHz /470MHz LoRa Wireless transceiver module feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech chipset with the application for ARM meters.
Reference: DWM21061001
TheLLDS12 LoRaWAN LiDAR ToF Distance Sensor for distance measurement be use to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection.
Reference: ODL25011302
WSS-08 Optical Rain Guage The Optical Rain Guage for the WSC2-L Weather Station Kit is a weather monitor instrument to monitor rainfall.
Reference: ODL22071802
The LSN50v2-D23 is a LoRaWAN Temperature Sensor nodes with two sensor cable which are waterproof, moisture-proof and anti-rust for long-term usage . It can be used to measure the temperature of air, liquid or object.
Reference: ODL23020605
The LWL03A is a LoRaWAN Water Leak Controller use a Water Leak Cable on the ground to detect water leakage. The water leak cable is sensitivity, when there is water over the leak cable.
Reference: DWM16122301
The Lora BEE is based on the SX1276/SX1278 transceiver.The Lora BEE targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection,building automation.
Reference: ODL22040502
WSC1-L Dragino Weather Station solution Main Process Unit can upload these sensor data to IoT server via LoRaWAN wireless protocol.
RF Explorer - ISM Combo Handheld Digital Spectrum Analyzer is a very affordable tool for work in all ISM popular frequency bands.