- -$0.50
- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
The AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
The AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n has rich interface such as Ethernet, USB, UART and plenty of GPIOs and use small outline package, it is used widely in mini routers and IoT projects.
Pin No. |
signal | Direction(defluat) | Remark |
1 | GND | GROUND | |
2 | ANT | Antenna Output | |
3 | GND | GROUND | |
4 | GND | GROUND | |
5 | CSO | SPI CS pin | |
6 | MOSI | SPI MOSI pin | |
7 | MISO | SPI MISO pin | |
8 | SCK | SPI SCK pin | |
9 | GPIO11/RESET BOTTON | Reset Button PIN | H-Level is active |
10 | I012 | General I/0 | |
11 | I08 | General I/0 | |
12 | I07 | General I/0 | |
13 | I06 | General I/0 | |
14 | I026 | General I/0 | |
15 | I028 | General I/0 | |
16 | I017 | 0UT/LED | LED for Ethernet Port4 |
17 | I016 | General I/0 | |
18 | I015 | 0UT/LED | LED for Ethernet Port2 |
19 | I014 | General I/0 | |
20 | I013 | 0UT/LED | LED for Ethernet Port0 |
21 | I001 | General I/C | |
22 | I000 | General I/0 | |
23 | GND | GROUND | |
24 | TXD | Serial data IN(TX) | |
25 | RXD | Serial data OUT (RX) |
|
26 | GND | GROUND | |
27 | RST | RESET | |
28 | I023 | General I/0 | |
29 | I019 | General I/0 | |
30 | I022 | General I/0 | |
31 | I020 | General I/0 | |
32 | I021 | General I/0 | |
33 | I018 | General I/0 | |
34 | I024 | General I/0 | |
35 | GND | GROUND | |
36 | P4_RX+ | Eth erne t Port4 | |
37 | P4_RX- |
||
38 | P4_TX+ | ||
39 | P4_TX- |
||
40 | P2_RX+ | Ethernet Port2 | |
41 | P2_RX- |
||
42 | P2_TX+ | ||
43 | P2_TX- |
||
44 | PO_RX+ | Ethernet Port0 | |
45 | PO_RX- |
||
46 | PO_TX+ | ||
47 | PO_TX- |
||
48 | NET POW | 2.5v output for Ethernet |
|
49 | GND | GROUND | |
50 | USB- | USB Master USB- | |
51 | USB+ | USB Master USB+ | |
52 | GND | GROUND | |
53 | VCC3V3 | Power Supp ly, 3.3V | |
54 | VCC3V3 | Power Supply,3.3V |
Reference: DWM15041601
2.4ghz PCB built-in antenna with ipx/ufl connector for WIFI antenna , Blue tooth antenna and Zigbee Antenna.
Reference: DWM15100701
High quality IPEX to SMA Male RG178 Type RF Cable Assemblies Pigtails RF Jumper Cables.
Reference: DWM17032101
LoRa IoT Development Kit is designed to facilitate beginners and developers,The LoRa IoT kit will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
Reference: DWM21031502
The DWM-AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: ODL25042504
Alfa Networks AHPI7292S WiFi HaLow Pi Hat is compatible with the Raspberry Pi to be mounted on top of the Raspberry Pi, which can work with the RAK7391 IOT LoRaWAN Gateway Carrier Board.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM20030407
ESP8266 IOT Weather Station Kit with DHT11sensor UV sensor and water flow sensor IOT Weather Station Kit send the weather information with another ESP8266 module and display with an OLED kit.
Reference: DWM21031004
Wt32-s1 WiFi module is a low-power, cost-effective embedded wireless network control module developed by Qiming cloud technology. It can meet the needs of IOT applications, such as smart grid, building automation, security, smart home and telemedicine.
Reference: DWM17072501
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
Reference: DWM17082404
WT8266-S2 ESP8266 Wi-Fi network control module With Ceramic antenna, IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc.
Reference: DWM15092501
HI-Link HLK-SW16 16 Channel Android/Smart Phone CWiFi Relay /WiFi Relay Module with P2P Function.
Reference: DWM19062801
ESP32-WROOM-32D and ESP32-WROOM-32U are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding.
Reference: DWM14072601
Serial to WiFi/Serial to RJ45/RJ45 to WiFi/WiFi Router StartKit.
Reference: DWM14061501
HLK-RM02 is a Mini wireless router basic with the Ralink RT5350 main chip.WIFI Router/Gateway/Bridge/AP All-In-One HLK-RM02.
Reference: DWM17072502
D-duino is a combination of ESP8266 and OLED is a 6 IOT WiFi NodeMCU Development Board .
Reference: DWM19060503
The Intel AX200 1730Mbps Dual Band 802.11ax Intel Wifi 6 AX200 NGW M.2 Wireless Wlan Wi-Fi Card Adapter For Intel AX200 With BT 5.0 MU-MIMO
Reference: DWM21031003
WT32-ETH01 embedded WIFI serial port to Ethernet module based on ESP32 series module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices.
Reference: DWM14101101
Low cost UART-WIFI module, DWM-HLK-RM30 is a serial device provide solution for serial device transfer data with Ethernet.
Reference: DWM14032501
HLK-RM04 is Hi-Link low-cost embedded UART-ETH-WIFI converter module (serial port - Ethernet -Wireless network) you can take it as an ethernet wireless brige can used to be an wireless internet network and wifi router.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
The AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.