- -$4.00
- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
HLK-RM04 is Hi-Link low-cost embedded UART-ETH-WIFI converter module (serial port - Ethernet -Wireless network) you can take it as an ethernet wireless brige can used to be an wireless internet network and wifi router.
Useful Link: RMO4 development kits, Application vedio.
FCC ID:ZXVHLK-RM04
This product is an embedded module based on the universal
serial interface network standard,built-in TCP / IP protocol stack,
enabling the user serial port, Ethernet, wireless network (wifi)
interface between the onversions.Through the HLK-RM04 module,
the traditional serial devices do not need to change any
configuration,data can be transmitted through the Internet network.
Provide a quick solution for the user’s serial devices to transfer
data via Ethernet.
Features:
2.4GHz 802.11b/g/n,compatible
Support IEEE 802.3、IEEE 802.3u
WiFi Client/AP/Router Mode
Support wps/wds
The range of baudrate: 1200~500000bps
Support transparent transmission mode
Support multiple security authenti-cation
Mechanisms:
WEP64/WEP128/ TKIP/ AES/WEP/WPA-PSK/WPA2-PSK
Support wireless roam
Support multiple network protocols:
PPPOE/TCP/UDP/DDDNS/DHCP/DNS/HTTP/Firewre
Support AT+ instruction set
Support two config methods:Serial/WEB
Device Dimensions 29mm*40mm* 8.8mm
Lead-free and RoHS compliant
Reference: DWM14032502
2.4GHz whip Antenna it's for wifi module ,bluetooth module,zigbee module and wifi routers.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM14120602
DWM2400-XP1M, a sucker wireless antenna, is designed for 2.4GHz wireless communication system. It is of good VSWR, ingenious structure, easy installation, and stable performance, with good anti-vibration and anti-aging ability.
Reference: DWM15041601
2.4ghz PCB built-in antenna with ipx/ufl connector for WIFI antenna , Blue tooth antenna and Zigbee Antenna.
Reference: DWM17072502
D-duino is a combination of ESP8266 and OLED is a 6 IOT WiFi NodeMCU Development Board .
Reference: DWM14110207
Low cost DWM-NRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible module.
Reference: DWM18103003
USD17/pcs MOQ100pcs DWM-HE designed by Dragino is a minimal system which installed with OpenWrt Linux system and support 150M 2.4G WiFi. It is compatible with 802.11b/g/n.
Reference: DWM15092501
HI-Link HLK-SW16 16 Channel Android/Smart Phone CWiFi Relay /WiFi Relay Module with P2P Function.
Reference: DWM15080504
Low Price ESP-12E ESP8266 Serial Wi-Fi Wireless Transceiver Module for Arduino / RPi Built-in Antenna.it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home,wifi router.
Reference: DWM16121103
Easy Pulse is a DIY pulse sensor that can be used for detecting the cardio-vascular pulse wave from a fingertip.
Reference: DWM19060501
The Intel 9260AC adapter supports 1.73Gbps Wireless 9260NGW NGFF Network Wifi Card For Intel ac 9260 2.4G/5Ghz 802.11ac Wi-fi Bluetooth 5.0 for Laptop Windows 10.
Reference: DWM15081902
Low cost DWM-ESP8266 ESP-05 Serial to WIFI wireless transceiver module with IPEX external antenna connector and chip anetnna it's for Arduino,Raspberry Pi , AVR and widely used in networking, smart home project when it is connected to the wifi router.
Reference: DWM20030402
EasyESP-1 WiFi-enabled ESP8266 microcontroller is a rapid prototyping and development board for the low-cost, specially designed for beginners.
Reference: DWM17072501
ESP8266 Evaluation Board ESP-12 is full WIFI evalution board which mounted on a PCB with all the GPIO broken out,each GPIO has an LED connected so you can quickly test your code without connecting external hardware, and a LDR to test the ADC.
Reference: DWM21030901
The WT-01F module core processor ESP8285 integrates the industry-leading Tensilica L106 ultra-low-power 32-bit micro MCU the main frequency supports 80 MHz and 160 MHz, and supports RTOS, Integrated Wi-Fi MAC/BB/RF/PA/LNA, external spring antenna.
Reference: DWM21031502
The DWM-AR9331 is a minimal system which installed with OpenWrt Linux system and support 2.4G WiFi It is compatible with 802.11b/g/n.widely use as an IoT gateway core modules.
Reference: DWM17082402
WT8266-DK WiFi Module Development Kit for WT8266-S1&WT8266-S2 The test board can simulate serial devices to access WiFi network and implement the data transmission, meanwhile it can simulate working as the main control chip to access data of other devices and control
Reference: DWM17082404
WT8266-S2 ESP8266 Wi-Fi network control module With Ceramic antenna, IoT application requirements in smart power grids, building automation, security and protection, smart home, remote health care etc.
Reference: ODL24022601
HLK-RM08K MT7688K Based Wi-Fi Module for repeater, storage, IPC, audio and IoT gateway applications.the mutual conversion between serial port, Ethernet, and wireless network (WIFI) interfacessolve the user's serial device network transmission data problem.
Reference: DWM17032701
DWM-HE designed by Dragino is a minimal system which installed with OpenWrt Linux system and support 150M 2.4G WiFi. It is compatible with 802.11b/g/n. HE has rich interface such as Ethernet, USB, UART and plenty of GPIOs. HE use small outline package, it is used widely in WiFi solutions.
HLK-RM04 is Hi-Link low-cost embedded UART-ETH-WIFI converter module (serial port - Ethernet -Wireless network) you can take it as an ethernet wireless brige can used to be an wireless internet network and wifi router.