- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
PAN WIFi Outdoor IoT Appliance is an Open Source OpenWrt appliance designed for IoT application over long distance WiFi connection.
The PAN is an Open Source OpenWrt appliance designed for IoT application over long distance WiFi connection.
PAN has two RJ45 ports, a WiFi 802.11 b/g/n interface to provide flexible network connection via LAN cable/ wifi.
PAN is fully open source, user can modify the inside Linux system or compile a firmware for their customized applications.
The goal for PAN is to fulfill IoT requirement on dedicate application or installations where required long distance transmission. Applications for PAN include remote control of robots, data logging, web applications for data presentation, mesh networking over WiFi and many more.
OpenWrt is a reliable Linux distribution for embedded system. It is open source, under well developed and maintained. OpenWrt used package system, lots of powerful utility, software are maintained as packages form. Users can easily install, remove these packages to make a deep customized system.
Developers have the possibility to improve or do innovation on the hardware and release a new /unique product base on requirement.
Around 1 watt power consumption in working mode.
Can be configured in different WiFi mode for various applications.
AP mode: as what a normal WiFi routers does, so other WiFi client can connect to MS14N and share its internet connection.
Client mode: as what a normal PC does to connect to your existent WiFi router for internet connection.
Ad-Hoc for mesh network.
The most complicate and difficulty parts are built as mother board. Developers focus on the MCU daughter board design only. This helps to reduce the development time, cost, risk, difficulty to release a new product to test/seize the market.
MS14N has a Professional/Industrial enclosure which can be used directly for the market.
Built-in Web server provides convenient to use/configure/upgrade/monitor or have full control by SSH/Serial.
Firmware can be upgraded via serial port, SSH access, GUI interface for easy maintaining.
Robust software/hardware interface to reduce after-sale support cost.
Daughter board can be upgraded remotely to reduce the maintaining cost and provide central management/ deployment.
Reuse all the source from Arduino Yun to speed up development.
Download
Reference: DWM17102702
LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM17111102
MS14N-S Linux IoT / VoIP Appliance With Sensor Terminal is to solve the connectivity problem and greatly enhance micro-controller products such as the Arduino.
Reference: DWM17111103
MS14N-P Linux IoT / VoIP Appliance Without Sensor Terminal is to solve the connectivity problem and greatly enhance micro-controller products such as the Arduino.
Reference: DWM20033101
ER18505+SPC1520 Super Pulse Cap 4000mAh Li/SOCI2 unchargable battery for LSN50 Sensor nodes.
Reference: DWM20072902
The LDDS75 LoRaWAN Distance Detection Sensor node is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
Reference: ODL24090104
The PS-LS-T sensors are powered by solar power + li-on battery with a Thread Installation Type Air Water Pressure sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: DWM16122302
The Lora/GPS Arduino Shield is with 433MHz /868MHz /915MHz Versions is a expension board of LoRa™/GPS for use with the arduino.This product is intended for those interested in developing LoRa™/GPS solutions.
Reference: ODL25022401
The DDS20-LS Solar-powered LoRaWAN Ultrasonic liquid level sensor supports BLE configuration and wireless OTA update which makes users easy to use.
Reference: ODL25030403
The CPL03-LB is a Solar-Powered LoRaWAN Contact Sensor that detects open/close status and uplinks to the IoT server via the LoRaWAN network. Users can see the dry contact status, open time, and open counts in the IoT Server.
Reference: ODL23020804
The TrackerD is built-in with GPS, Wi-Fi, BLE, Temperature, Humidity, Motion Detection, and Buzzer which can use Arduino IDE to customize the software for IoT solution.
Reference: ODL23110105
WSS-01 RS485 Rain Gauge is a weather monitor instrument to monitor rainfall for LoRaWAN Weather station application.
Reference: ODL25030301
The DS03A-LS is a Solar-Powered LoRaWAN Door Sensor It detects the door open/close status and uplinks to the IoT server via the LoRaWAN network. Users can see the door status, open duration, and open counts in the IoT Server.
Reference: ODL25022502
The LDS12-NB is an NB-IoT LiDAR ToF (Time of Flight) Distance Sensor that can be applied to scenarios such as horizontal distance measurement, parking management system, object proximity and presence detection, intelligent trash can management system, robot obstacle avoidance, automatic control, sewer, etc.
Reference: DWM19090601
The LM502 use the newest LoRa Modem SX1262 which provide high transmit power for ultra long range, ultra low power communication for LPWAN application.
Reference: ODL23091204
DDS75-LB LoRaWAN Distance Detection Sensor which supports BLE configure and wireless OTA update is a distance detection sensor that uses ultrasonic sensing technology for distance measurement, and temperature compensation is performed internally to improve the reliability of data.
Reference: ODL25022402
The DDS20-NB is an NB-IoT Ultrasonic liquid-level sensor that supports different uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and supports uplinks to various IoT Servers.
Reference: ODL23103102
The RS485-LB is an RS-485 / UART to LoRaWAN Converter for Internet of Things solutions. The user can connect an RS485 or UART sensor to the RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload it via the LoRaWAN network to the IoT server.
Reference: DWM16092702
The Lora/GPS_HAT is an expension module for LoRaWan for using with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions which is based on the SX1276/SX1278 transceiver.
Reference: ODL23103003
LSE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture supports BLE configure and wireless OTA update It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
PAN WIFi Outdoor IoT Appliance is an Open Source OpenWrt appliance designed for IoT application over long distance WiFi connection.