- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
The CS01-LS is a solar-powered 4-channel current Sensor Converter. It can be used to monitor the machine's running status and analyze power consumption trends.
The CS01-LS is a solar-powered 4-channel current Sensor Converter. It can convert the reading from the current sensors and upload it to the IoT server via the LoRaWAN Network.
CS01-LS can be used to monitor the machine's running status and analyze power consumption trends.
The CS01-LS supports a maximum of 4 current sensors. The current sensors are detachable and can be replaced with different scales.
CS01-LS supports BLE configure and wireless OTA update, which makes user easy for users to use.
CS01-LS is powered by a Solar panel + 3000mAh Li-ion battery, and it is designed for long-term use up to several years.
LoRaWAN 1.0.3 Class A
Bands:CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Ultra-low power consumption
Supports a maximum of 4 current sensors
Support various current sensor Ratio: 100A/50mA, 300A/50mA, 600A/50mA
Monitor the machine's running status
Analyze power consumption trends
Current Alarm
Uplink on periodically
Downlink to change the configuration
Support BLE and LoRaWAN remote configuration
Support wireless OTA update firmware
Solar panel + 3000mAh Li-ion battery
Common DC Characteristics:
Supply Voltage: Built-in Battery, 2.5V ~ 3.6V
Operating Temperature: -40 ~ 85°C
SCT013G-D-100:
Split-core current transformer
Spec: 100A/50mA
φ16mm Aperture
SCT024-300:
Split-core current transformer
Spec: 300A/50mA
φ24mm Aperture
SCT036-600:
Split-core current transformer
Spec: 600A/50mA
φ36mm Aperture
Frequency Range, Band 1 (HF): 862 ~ 1020 MHz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Solar panel + 3000mAh Li-ion battery
Capacity: 3000mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
CS01-LS LoRaWAN 4 Channels Current Sensor Converter x 1
XX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
SCT013G-D-100: 100A/50mA
SCT024-300: 300A/50mA
SCT036-600: 600A/50mA
Reference: DWM14102101
Low cost ACS712 5A /20A /30A Hall Current Sensor Module.
Reference: ODL22040501
The LPS8N is an open-source LoRaWAN Gateway which includes a SX1302/03 LoRa concentrator and has an optional cellular version that can provide 3G/4G connectivity to the internet.
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: ODL25062901
The CS01-LB is a 4-channel current Sensor Converter. It can convert the reading from the current sensors and upload it to the IoT server via the LoRaWAN Network. It can be used to monitor the machine's running status and analyze power consumption trends.
Reference: ODL25021903
SDI-12-NB is an SDI-12 to NB-IoT Converter that supports BLE configuration and OTA update and is designed for IOT Agriculture sensors and Weather stations.
Reference: DWM17032701
DWM-HE designed by Dragino is a minimal system which installed with OpenWrt Linux system and support 150M 2.4G WiFi. It is compatible with 802.11b/g/n. HE has rich interface such as Ethernet, USB, UART and plenty of GPIOs. HE use small outline package, it is used widely in WiFi solutions.
Reference: DWM21010101
LBT1 is a Long Range / low power consumption LoRaWAN Bluetooth tracker. LBT1 scans and find the nearest i-Beacon info and send to IoT server via LoRaWAN wireless network.
Reference: ODL25011303
WSS-09 9 in 1 Sensor for Dragino WSC2-l Weather Station solution measures the below values: Wind Speed, Wind Direction, Temperature, Humidity, Air Pressure, Illumination, PM2.5, PM10, Noise & Rain Gauge.
Reference: DWM17111202
LoRaST 433MHz /470MHz /868MHz /915MHz Open Source Long Range Wireless LoRa Transceiver is a small wireless transceiver module offers a very compelling mix of long range, low power consumption and secure data transmission.
Reference: ODL24062203
TS01-LB is an outdoor LoRaWAN Tilting Sensor that is specially designed for detecting the angle of trees, buildings, or large-scale equipment measures pitch and roll angle and converts to LoRaWAN wireless data, and sends it to the IoT platform via LoRaWAN network.
Reference: ODL23110104
WSS-02 is a RS485 wind speed and wind direction monitor designed for weather station solution.
Reference: DWM18073001
LG02-P is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: DWM18121802
DWM-WWR Spot new weather station wind speed sensor wind direction and rainfall Internet of things Secondary development .
Reference: ODL23110103
WSC2-LB is the Main Process Unit for Weather Station solution which is full compatible with LoRaWAN Class C protocol, it can work with standard LoRaWAN gateway.
Reference: DWM21072702
The LSN50V2-S31B is LoRaWAN Temperature & Humidity Sensor node be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: ODL25030103
The PS-LB-D sensors with a Differential Pressure Type sensor which can measure Air, Water pressure, and liquid level and upload the sensor data via wireless to the LoRaWAN IoT server.
Reference: ODL23103103
The DS03A-LS is a LoRaWAN Door Sensor for Internet of Things solution. It detects door open/close status and uplinks to IoT server via LoRaWAN network.
Reference: ODL25042901
The LHT65N-E2 is a Long Range LoRaWAN Sensor node with a Temperature & Humidity sensor whose external sensor connector can be used for more than 10 years.
Reference: ODL22110601
The CPN01 is an NB-IoT Dry Contact Sensor. It detects open/close status and uplinks the info to IoT server via NB-IoT network is designed for outdoor use. It has a weatherproof enclosure and industrial-level battery to work in low to high temperatures.
Reference: ODL25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes that support BLE configuration and OTA updates to convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
The CS01-LS is a solar-powered 4-channel current Sensor Converter. It can be used to monitor the machine's running status and analyze power consumption trends.