The RS485-LS is an RS485/ UART to LoRaWAN Converter for Internet of Things solutions. Users can connect RS485 or UART sensor to the RS485-LS converter, and configure RS485-LS to periodically read sensor data and upload via the LoRaWAN network to the IoT server.
RS485-LS can interface to the RS485 sensor, 3.3v/5v UART sensor, or interrupt sensor. RS485-LS provides a 3.3v output and a 5v output to power external sensors. Both output voltages are controllable to minimize the total system power consumption.
RS485-LB/LS is IP67 waterproof and powered by a solar panel + 3000mAh li-on battery it is designed for long-term use for several years.
RS485-LS runs standard LoRaWAN 1.0.3 in Class A. It can reach a long transfer range and is easy to integrate with a compatible gateway and IoT server.
For data uplink, RS485-LS sends user-defined commands to RS485 devices and gets the return from the RS485 devices. RS485-LS will process these returned data according to user-defined rules to get the final payload and upload it to the LoRaWAN server.
For data downlink, RS485-LS runs in LoRaWAN Class A. When there are downlink commands from the LoRaWAN server, RS485-LS will forward the commands from the LoRaWAN server to RS485 devices.
RS485-LS Supports BLE configuration and wireless OTA update which makes users easy to use.
Each RS485-LS pre-load with a set of unique keys for LoRaWAN registration, register these keys to the LoRaWAN server and it will auto-connect after powering on.
Features:
LoRaWAN 1.0.3 Class A
Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864/MA869
Ultra-low power consumption
Support multiply RS485 devices by flexible rules
Support Modbus protocol
Support Interrupt uplink
Supports connecting UART sensors with 3.3V or 5V
Support Bluetooth v5.1 and LoRaWAN remote configure
Support wireless OTA update firmware
AT Commands to change parameters
Uplink on periodically
Downlink to change configure
Solar panel + 3000mAh Li-on battery (RS485-LS)
Specifications:
Common DC Characteristics:
Supply Voltage: Built-in Battery, 2.5v ~ 3.6v
Operating Temperature: -40 ~ 85°C
I/O Interface:
Battery controllable output (2.6v ~ 3.6v depends on battery)
+5v controllable output
1 x RS485 Interface
1 x UART Interface , 3.3v or 5v
1 x Interrupt or Digital IN/OUT pins
1 x I2C Interface
1 x one wire interface
LoRa Spec:
Frequency Range, Band 1 (HF): 862 ~ 1020 Mhz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Battery:
Solar panel + Li-on battery
Capacity: 3000mAh
Power Consumption:
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
Applications:
Wireless Alarm and Security Systems
Home and Building Automation
Automated Meter Reading
Industrial Monitoring and Control
Long-range Irrigation Systems, etc.
Package Includes:
1 x RS485-LS RS485/UART to LoRaWAN Converter
Dimensions and Weight:
Device Size: 9.7 x 6.5 x 4.7 cm
Device Weight: 150g
Package Size / pcs: 14.0 x 8x 5 cm
Weight / pcs: 180g
Order Info:
RS485-LS-XX-YY:
XX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
YY:
12: With M12 IP68 waterproof cable hole(default)
16: With M16 IP68 waterproof cable hole
Useful Link:
Datasheet
User Manual
Firmware
Certificate
