- New

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
The SE0X-LB is a LoRaWAN soil moisture and EC Sensor for IoT agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. It detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the LoRaWAN IoT Server.
The Dragino SE0X-LB is a LoRaWAN soil moisture and EC Sensor for IoT agriculture, which can be equipped with 4 sensor probes. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. The soil sensor uses the FDR method to calculate the soil moisture with compensation from soil temperature and conductivity. It has also been calibrated in the factory for Mineral soil type.
It detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the LoRaWAN IoT Server.
The LoRa wireless technology used in SE0X-LB allows devices to send data and reach extremely long ranges at low data rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
SE0X-LB supports BLE configuration and wireless OTA update, which makes user easy to use.
SE0X-LB is powered by an 8500mAh Li-SOCI2 battery, it is designed for long-term use up to several years.
Each SE0X-LB is pre-loaded with a set of unique keys for LoRaWAN registrations, register these keys to the local LoRaWAN server, and it will auto-connect after power on.
LoRaWAN 1.0.3 Class A
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
Ultra-low power consumption
External 4 × sensor probes, probe length: 2.5m
Monitor Soil Moisture
Monitor Soil Temperature
Monitor Soil Conductivity
Support Bluetooth v5.1 and LoRaWAN remote configuration
Support wireless OTA update firmware
AT Commands to change parameters
Downlink to change the configuration
IP66 Waterproof Enclosure
8500mAh Li/SOCl2 Battery
Supply Voltage: Built-in Battery, 2.5V ~ 3.6V
Operating Temperature: -40 ~ 85°C
Range: 0-100.00 V/V %
Resolution: 0.01 V/V %
Accuracy: ±3% (0-53%)V/V %, ±5% (>53%) V/V %
Measure Method: FDR, with temperature &EC compensation
Range: -40.00℃~85.00℃
Resolution: 0.01℃
Accuracy: -10℃~50℃:<0.3℃ ,All other: <0.6℃
Measure Method: RTD, and calibrate
Range: 0-20000 uS/cm(25℃)(0-20.0EC)
Resolution: 1 uS/cm
Accuracy: 2%FS
Measure Method: Conductivity, with temperature compensation
Frequency Range, Band 1 (HF): 862 ~ 1020 MHz
Max +22 dBm constant RF output vs.
RX sensitivity: down to -139 dBm.
Excellent blocking immunity
Li/SOCI2 un-chargeable battery
Capacity: 8500mAh
Self-Discharge: <1% / Year @ 25°C
Max continuous current: 130mA
Max boost current: 2A, 1 second
Sleep Mode: 5uA @ 3.3v
LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
SE0X-LB LoRaWAN Soil Moisture & EC Sensor Transmitter
Can I calibrate SE0X-LB to different soil types?
SE0X-LB is calibrated for saline-alkali soil and loamy soil. If users want to use it for other soil, they can calibrate the value in the IoT platform based on the value measured by saline-alkali soil and loamy soil. The formula can be found at this link.
Part Number: SE0X-LB-XX
The SE0X-LB model does not include probes. The probe (DR-SE-6P) needs to be purchased separately.
XX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
Type: DR-SE-6P Probe Model
Number: The number of the DR-SE-6P sensor probe
Reference: DWM22051601
The DLOS8N /DLOS8N-EC25 Outdoor LoRaWAN Gateway includes 1pcs SX1302 and 2pcs SX1250 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: ODL23103003
LSE01-LB is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture supports BLE configure and wireless OTA update It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
Reference: ODL24082903
The SE01-LS LoRaWAN Soil Moisture & EC Sensor is powered by Solar for IoT of Agriculture and supports BLE configuration and wireless OTA update.
Reference: ODL25022001
The SE01-NB uses the FDR method to calculate the soil moisture with the compensation from soil temperature and conductivity detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the NB-IoT IoT Server.
Reference: ODL23092701
LHT65N-PIR built-in Temperature & Humidity sensor and has an external PIR Probe it can detect environment Temperature & Humdity also detects People Activity via PIR probe and them send these info to LoRaWAN IoT Server.
Reference: ODL23031201
The LHT65N-E5 Temperature, Humidity & Illuminance sensor is a Long Range LoRaWAN Sensor. It includes a built-in Temperature & Humidity sensor and has an external Illuminance sensor.
Reference: ODL25030501
The SW3L-LS is a LoRaWAN Flow Sensor. It detects water flow volume and uplinks to the IoT server via the LoRaWAN network. Users can use this to monitor the water usage for buildings.
Reference: ODL23091201
SW3L-LB LoRaWAN The Outdoor water Flow Sensor will send the water flow volume every 20 minutes. It can also detect the water flow status and send an Alarm, to avoid waste from water usage such as a broken toilet case.
Reference: DWM18051402
Brand: Semtech
HPD14A SX1278 433MHz /470MHz LoRa Wireless transceiver module feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech chipset with the application for ARM meters.
Reference: DWM20061503
The LDS01 is a LoRaWAN Door Sensor. It detects door open/close status and will send periodically data every day as well as for each door open/close action. It also count the door open times and calculate last door open duration.
Reference: ODL22082509
The LDS03A is an Open/Close LoRaWAN Door Sensor. It detects door open/close status and uplinks to IoT server via LoRaWAN network. user can see the door status, open duration, open counts in the IoT Server.
Reference: ODL22082512
The PG1302 is a multi-channel high performance transmitter/receiver designed to simultaneously receive several LoRa packets using random spreading factors on random channels which is fully compatible with RPi3B/3B+/4.
Reference: ODL25060902
LA66 USB LoRaWAN Adapter v2 is designed to fast turn USB devices to support LoRaWAN wireless features which making it easy to add LoRaWAN wireless features to a PC / Mobile phone or an embedded device that has a USB Interface.
Reference: ODL23110102
The DDS04-LB is a LoRaWAN 4-Channels Distance Sensor upports BLE configure and wireless OTA update for Internet of Things solution. It is capable to add up to four Ultrasonic Sensors to measure four distances at the same time.
Reference: ODL25070201
The SE0X-LS is a Solar-Powered LoRaWAN soil moisture and EC Sensor. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. It detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the LoRaWAN IoT Server.
Reference: DWM17111202
LoRaST 433MHz /470MHz /868MHz /915MHz Open Source Long Range Wireless LoRa Transceiver is a small wireless transceiver module offers a very compelling mix of long range, low power consumption and secure data transmission.
Reference: ODL23092703
S31B-LB is a LoRaWAN Temperature and Humidity Sensor with a SHT31 sensor probe based SN50v3-LB or LSN50V3 supports BLE configure and wireless OTA update.
Reference: DWM18122002
Free Shipping LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: ODL25011401
SN50v3-NB is a worldwide used NB-IoT Sensor Node based on the BC660K-GL model that supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and supports uplinks to various IoT Servers.
Reference: DWM18110501
LG308 8 Channels Indoor LoRaWAN Pico Gateway is an open source LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
The SE0X-LB is a LoRaWAN soil moisture and EC Sensor for IoT agriculture. It is designed to measure the soil moisture of saline-alkali soil and loamy soil. It detects Soil Moisture, Soil Temperature, and Soil Conductivity, and uploads the value via wireless to the LoRaWAN IoT Server.