- -$0.50
- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
CoLinkEx is a hardware debugging adapter which supports JTAG & SW debugging with ARM Cortex M devices in CooCox software and Keil RealView MDK.
Useful Link: CoLinkEx User manual,CoLinkEx V1.1 Schematic, CoLinkEx Firmware, How to update.
CooCox CoLinkEx is a hardware debugging adapter which supports JTAG & SW debugging with ARM Cortex M devices in CooCox software and Keil RealView MDK.
Note: If you want to use CoLinkEx with CoIDE 1.4.0(or higher), CoFlash 1.4.0(or higher), CoMDKPlugin 1.4.0(or higher), you need to upgrade the firmware and install CoLinkEx Driver 1.2.0 or 1.2.1 at first.
Hardware Source Requirement
When you use CoLinkEx, The PC is required to use the following sources:
● CPU: 2.0GHz (at least)
● Memory: 512M (at least)
● USB Interface: 1 (at least)
● Serial Line interface use COM1
● Operation System: Windows XP/Windows Vista/Win 7
● Software need: CoIDE, MDK, IAR(with CoMDKPlugin, CoIARPlugin)
CoLinkEx support is available in:
● Keil RealView MDK 4.03 or higher (not include 4.13a)
● IAR Embedded Workbench 5.xx or higher
● CooCox CoFlash
● CooCox CoIDE
Hardware Introduction
ID |
Description |
ID |
Description |
D1 |
Red LED, Error status |
RESET |
Reset Button |
D2 |
Yellow LED, Connection |
J1 |
Micro-USB Interface |
D3 |
Blue LED, Busy status |
J2 |
10pin 2.54mm ARM JTAG/SW Interface |
JP1 |
Update Pin |
J3 |
10pin 2mm ARM JTAG/SW Interface |
JP2 |
Power Supply Pin |
J4 |
20pin 2.54mm ARM JTAG/SW Interface |
Jumpers settings
ID |
Name |
Default Settings |
Note |
JP1 |
UPDATE |
Open |
Allow user to update the firmware of CoLinkEx when this jumper is closed. |
JP2 |
Power |
Open |
Connecting VCC pin of the ARM JTAG/SW Interface to +3V3. |
SW/JTAG Debug Interface
CoLinkEx use ARM standard 20 pin, 2.54mm SW/JTAG Interface. Most target boards support this interface. The 10pin 2.54mm/2.0mm interface is also supported. You can use the interface to debug ARM Cortex M devices.
Mini USB Port
CoLinkEx communicates with and gets power from PC through this Mini USB AB interface. When you Install JP2, CoLinkEx will provide power supply to the target board.
LED
CoLinkEx has 4 indicator LEDs for indicating the power status, error, connection, and busy status of CoLinkEx.
Reference: DWM15110401
WaveShare ATMEL AVR Programmers & Debuggers USB AVR JTAGICE XPII Compatible Atmel JTAGICE mkII In-System Programmer and debuggers Supports AVR Studio 4/5/6.
Reference: DWM15110402
WaveShare ATMEL AVR Programmers USB AVRISP XPII Compatible AT AVR ISP mkII In-System Supports AVR Studio 4/5/6.
Reference: DWM15110401
WaveShare ATMEL AVR Programmers & Debuggers USB AVR JTAGICE XPII Compatible Atmel JTAGICE mkII In-System Programmer and debuggers Supports AVR Studio 4/5/6.
Reference: DWM15080602
USBASP USBISP Downloader Programmer for 51 AVR,With power and program the two indicators,On-board over-current protection,Support 5V and 3.3V power supply to the target board.
Reference: DWM14072101
Logic8/16 USB 24/100M logic analyzer / perfect decoder logic analyzer.
Reference: DWM14032103
Mini USB to RS485 / RS422 Converter FTDI CHIP converter adapter with Screw Terminals and photoelectric isolation.
Reference: DWM14032701
Xilinx Platform USB Cable, DLC9G , JTAG programmer , FPGA/CPLD Download Cable.
Reference: DWM15110402
WaveShare ATMEL AVR Programmers USB AVRISP XPII Compatible AT AVR ISP mkII In-System Supports AVR Studio 4/5/6.
Reference: DWM16110102
Mini USB to RS485 / RS422 Converter FTDI CHIP converter adapter with Screw Terminals and photoelectric isolation.
CoLinkEx is a hardware debugging adapter which supports JTAG & SW debugging with ARM Cortex M devices in CooCox software and Keil RealView MDK.