- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
The E22-M30S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
The E22-M30S series is the first wireless module in China to adopt Semtech's SX1268, SX1262 RF chip. This chip provides a variety of modulation methods, such as LoRaTM and traditional GFSK. Its special LoRaTM modulation method increases the communication distance.
RF Parameter | Value |
Remark |
Working frequency |
410~493 MHz,850~930 MHz | |
Transmitting power | 30 dBm |
Max. Power (1W) |
Receiving sensitivity | -150 dBm |
- |
Air data rate | 0.018k~300kbps |
- |
Test distance | 12000m |
In open and clear air, with maximum power, 5dBi antenna gain, height of 2m |
Hardware Parameter | Value |
Remark |
Size |
24 * 38.5 mm |
|
Antenna type |
IPEX / Stamp hole |
|
Communication interface |
SPI |
|
Package |
SMD |
|
Electronic parameter | Min. | Typ. | Max. | Unit | Condition |
Power supply |
2.5 | 5 | 5.5 | V | |
Communication level | 1.8 | 3.3 | 3.7 | V | |
Transmitting current |
600 | 650 | 700 | mA | 30dBm(1W) |
Receiving current |
12 |
14 | 16 | mA | |
Sleep current |
1 |
3 | 5 | nA | |
Operating temperature |
-40 | 20 |
+85 | ℃ | |
Operating humidity |
10 | 60 |
90 | % | |
Storage temperature |
-40 | 20 |
+125 | ℃ |
Pin No. |
Pin Item | Pin Direction | Pin Application |
1 |
GND |
- |
Ground |
2 |
GND |
- |
Ground |
3 |
GND |
- |
Ground |
4 |
GND |
- |
Ground |
5 |
GND |
- |
Ground |
6 |
RXEN |
Input |
RF switch RX control,connecting external MCU IO, valid in high level |
7 |
TXEN |
Input |
RF switch TX control,connecting external MCU IO or DIO2, valid in high level |
8 |
DIO2 |
Input/Output |
Configurable IO port(see more SX1262,Sx1268 datasheet) |
9 |
VCC |
- |
Power supply, 2.5V~5.5V(external ceramic filter capacitoris recommended) |
10 |
VCC |
- |
Power supply, 2.5V~5.5V(external ceramic filter capacitoris recommended) |
11 |
GND |
- |
Ground |
12 |
GND |
- |
Ground |
13 |
DIO1 |
Input/Output |
Configurable IO port(see more in SX1262,Sx1268 datasheet) |
14 |
BUSY |
Output |
State indicator(see more in SX1262,Sx1268 datasheet) |
15 |
NRST |
Input |
Chip reset initiation, valid in low level |
16 |
MISO |
Output |
SPI master input slave output |
17 |
MOSI |
Input |
SPI master output slave input |
18 |
SCK |
Input |
SPI clock |
19 |
NSS |
Input |
Chip select,for starting a SPI communication |
20 |
GND |
- |
Ground |
21 |
ANT |
- |
Stamp hole(50 ohm impedance) |
22 |
GND |
- |
Ground |
n No
Reference: DWM14073001
Brand: Semtech
APC340 LoRa series rf module is built in RFIC sx1278 and sx1276 which can work on 433MHz,470MHz ,868MHz,915MHz 20dBm Ultra Long Range Transceiver Module with LoRa spread spectrum modulation.
Reference: DWM15123001
Brand: Semtech
HM-TRLR-S series are operating at 433MHz, 868MHz, 915MHz low cost, high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM16092701
RFM98PW / RFM95PW which are Enhanced Power Long Range Transceiver Module.the available versions is RFM98PW 433MHz, and 868MHz,915MHz for RFM95PW.
Reference: DWM16112801
DWM-LoRa1276F30 is a 500W high power wireless transceiver module, which integrates SemtechRF transceiver chip SX1276. There are 868MHz and 915MHz for avaialble options.
Reference: DWM18022201
Dragino LoRa IoT Development Kit is designed to facilitate beginners and developers to quickly learn LoRa and IoT technology.it will show how to build LoRa network, and how to use the network to send data from a LoRa sensor node to the cloud server.
Reference: DWM18110601
Brand: Semtech
RFM98W 433MHz,470MHz transceivers feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech SX1278 chipset with the application for ARM meters.
Reference: DWM20030501
Brand: Semtech
The E19-M30S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1278(433MHz) and SX1276(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
Reference: DWM16011801
Brand: Semtech
LoRa1276 Wireless Transceiver Module adopts Semtech RF transceiver chip SX1276 which LOS transmission distance can reach to 4km~6km Long Distance.
Reference: DWM18102303
Brand: Semtech
USD17/pcs MOQ100pcs APC340 LoRa series rf module is built in RFIC sx1278 and sx1276 which can work on 433MHz,470MHz ,868MHz,915MHz 20dBm Ultra Long Range Transceiver Module with LoRa spread spectrum modulation.
Reference: DWM20030702
Brand: Semtech
The E22-M22S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.
Reference: DWM17083101
Brand: Semtech
USD4.3/pcs RFM96W / RFM98W MOQ100pcs 433MHz /470MHz LoRa rf module.build by the semtech chipset with the application for ARM meters.
Reference: DWM21031002
Brand: Semtech
The DWM-RAK4270 LPWAN Module is based on STM32L071 MCU and an SX1262 LoRa chip integrating a 32-bit ARM Cortex -M0+ MCU provides a number of highly configurable peripherals (configurable as I2C/SPI/UART interfaces).
Reference: DWM16050803
Brand: Semtech
HM-TRLR-Dseries are operating at 433MHz, 868MHz, 915MHz low cost, high performance transparent transceiver with LoRa/FSK/ GFSK/OOK modulation variety.It's mainly use for uav controller and drone data link.
Reference: DWM20061601
Brand: Semtech
DWM-RAK4200 LPWAN Evaluation Board is a WisBlock product consisting of RAK4200 LPWAN Module and RAK5005 WisBase includes an STM32L071 MCU and SX1276 LoRa® chip that complies with the LoRaWAN® 1.0.2 protocols.
Reference: DWM19022801
DWM-RAK2245 Pi HAT based SX1301 8 Channels LoRaWAN gateway with GPS module is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
Reference: DWM17120402
LoRa32u4 RA02 is a light and low consumption board based on the Atmega32u4 and SX1278 433MHz LoRA module.
Reference: DWM14073001
Brand: Semtech
APC340 LoRa series rf module is built in RFIC sx1278 and sx1276 which can work on 433MHz,470MHz ,868MHz,915MHz 20dBm Ultra Long Range Transceiver Module with LoRa spread spectrum modulation.
Reference: DWM19022802
DWM-RAK2245 Pi HAT Raspberry Pi 3B Lora start kit is a LoRaWAN gateway Module based on SX1301,Pre-install LoRa gateway OS.
Reference: DWM20041503
LoRa Module for ESP32 DIY Development Kit Wireless 868MHz Built-in Antenna IOT Development Board.
Reference: DWM18050301
DWM-RAK813 LoRa and Bluetooth Module nRF52832 and LoRa SX1276 core chip which is a combination of the BLE and LoRa of the relay node module.
The E22-M30S 433MHz /868MHz /915MHz SPI +30dBm Enhanced Power LoRa Transceiver Module is based on original imported RFIC SX1268(433MHz) and SX1262(868MHz/915MHz) from SEMTECH, adopts LoRa spread spectrum technology.