All best sellers
RFM92W /RFM95W 868MHz /915MHz LoRa transceiver RF module
  • RFM92W /RFM95W 868MHz /915MHz LoRa transceiver RF module

RFM95W SEMTECH SX1276 868MHz /915MHz HopeRF LoRa transceiver RF module

DWM18110602

RFM95W  transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech serice LoRa SX1276 chipset,usually build for the ARM application.

Center frequency
Part Number

Volume discounts

Quantity Unit discount You Save
10 $0.10 Up to $1.00
50 $0.20 Up to $10.00
100 $0.30 Up to $30.00
$4.50
Tax excluded
Quantity

The minimum purchase order quantity for the product is 2.

Description

Brief introduction

The RFM95W transceivers feature the LoRaTM long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
Using Hope RF’s patented LoRaTM modulation technique RFM92W can achieve a sensitivity of over -137.5 dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier  yields  industry  leading  link  budget  making  it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.
These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The deliver exceptional phase noise, selectivity, receiver linearity  and  IIP3  for  significantly lower  current consumption than competing devices.

KEY PRODUCT FEATURES

  •   LoRaTM Modem.
  • 157.5 dB maximum link budget.
  • +20 dBm - 100 mW constant RF output vs. V supply.
  • +14 dBm high efficiency PA.
  • Programmable bit rate up to 300 kbps.
  • High sensitivity: down to -137.5 dBm.
  • Bullet-proof front end: IIP3 = -12.5 dBm with FSK.
  • 100 dB blocking immunity.
  • Low RX current of 10 mA, 100 nA register retention.
  • Fully integrated synthesizer with a resolution of 61 Hz.
  • FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.
  • Built-in bit synchronizer for clock recovery.
  • Sync word recognition.
  • Preamble detection.
  • 127 dB Dynamic Range RSSI.
  • Automatic RF Sense with ultra-fast AFC.
  • Packet engine up to 64 bytes with CRC.
  • Built-in temperature sensor and low battery indicator.
  • Module Size:16*16mm.


APPLICATIONS

  • Automated Meter Reading.
  • Home and Building Automation.
  • Wireless Alarm and Security Systems.
  • Industrial Monitoring and Control

 

Useful Link:

Application noteDemo code for RFM92WROHSFCC,ETSI.

RFM95WDemo codeRoHS report FCC test report,  ETSI test report.

Datasheet: RFM95W.


User guide
: RFM9x StartKit Tool Application User Guide

Product Details
DWM18110602
1000 Items
You might also like
16 other products in the same category:

Reference: DWM20053103

Brand: Semtech

DWM-RAK4600 LPWAN Evaluation Board

The DWM-RAK4600 development board allows access to all serial and GPIO ports for easy configuration. The RAK4600 core module includes nRF52832 MCU and SX1276 LoRa® chip to help you quickly and easily develop/test your firmware.

Price $35.50
More
In stock

Reviews

Write your review

RFM95W SEMTECH SX1276 868MHz /915MHz HopeRF LoRa transceiver RF module

RFM95W  transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech serice LoRa SX1276 chipset,usually build for the ARM application.

Write your review

Follow us on Facebook