All best sellers

RFM95W 868MHz /915MHz HopeRF LoRa transceiver RF module for IoT end sensor nodes

DWM21031001

The RFM95W  transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech Sx1276 LoRa chipset good for building the for IoT end sensor nodes.

Center frequency

Volume discounts

Quantity Unit discount You Save
10 $0.30 Up to $3.00
$5.00
Tax excluded
Quantity

Description

Brief introduction

The  RFM95W transceivers  feature  the  LoRaTM  long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.

Using Hope RF’s patented LoRaTM modulation technique RFM95W can achieve a sensitivity of over -148dBm using a low cost crystal and bill of materials. The high sensitivity combined with the integrated +20 dBm power amplifier yields  industry  leading  link  budget  making  it optimal for any application requiring range or robustness. LoRaTM also provides significant advantages in both blocking and selectivity over conventional modulation techniques, solving the traditional design compromise between range, interference immunity and energy consumption.

These devices also support high performance (G)FSK modes for systems including WMBus, IEEE802.15.4g. The RFM95W deliver exceptional phase noise, selectivity, receiver linearity  and  IIP3  for  significantly lower  current consumption than competing devices.

KEY PRODUCT FEATURES

● LoRaTM Modem.

● 168 dB maximum link budget.

● +20 dBm - 100 mW constant RF output vs. V supply.

● +14 dBm high efficiency PA.

● Programmable bit rate up to 300 kbps.

● High sensitivity: down to -148 dBm.

● Bullet-proof front end: IIP3 = -12.5 dBm.

● Excellent blocking immunity.

● Low RX current of 10.3 mA, 200 nA register retention.

● Fully integrated synthesizer with a resolution of 61 Hz.

● FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation.

● Built-in bit synchronizer for clock recovery.

● Preamble detection.

● 127 dB Dynamic Range RSSI.

● Automatic RF Sense and CAD with ultra-fast AFC.

● Packet engine up to 256 bytes with CRC.

● Built-in temperature sensor and low battery indicator.

● Modue Size:16*16mm

APPLICATIONS

  • Automated Meter Reading.
  • Home and Building Automation.
  • Wireless Alarm and Security Systems.
  • Industrial Monitoring and Control

 

Useful Link:

DatasheetRFM95W-V2.0.pdf

RFDK_PIC16_LCD V1.1hardware(131029)

HoepRF_HSP_V1.0

CP210x_VCP_Windows

RFMXXB_Tools

HopeRF_RFDK_RFMxx_DEMO_V2.1_operation_manual

HopeRF_RF-EVB_manual_V1.21

AN2003-LoRa communication example

HoepRF_HSP_V1.3

RFM9x_GUI_Setup_V1.1

RFM9x_GUI User Guide V1.0_EN

Design Guides:

AN0002-Hopeduino platform construction guideline

ANTENNAS_MODULE

RFDK_RFM95_V2.1

Certification & Test Reports:

RFM95-915S2(13dBm)_FCC

RFM95-868S2(11dBm)

RF Module Reach

RF Module ROHS 

RFduino Board & LoRa module as DK board User guide


User guide
: RFM9x StartKit Tool Application User Guide

Product Details
DWM21031001
1500 Items
You might also like
16 other products in the same category:

Reviews

Write your review

RFM95W 868MHz /915MHz HopeRF LoRa transceiver RF module for IoT end sensor nodes

The RFM95W  transceivers with 868 MHz and 915 MHz feature the LoRa TM long range rf module which core chipset are the semtech Sx1276 LoRa chipset good for building the for IoT end sensor nodes.

Write your review

Follow us on Facebook