- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
The LSNPK01 is a LoRaWAN Soil NPK Sensor for IoT of Agriculturebase. detects soil's Nitrogen, Phosphorus, and Potassium use TDR method, and uploads these values via wireless to LoRaWAN IoT Server.
The Dragino LSNPK01 is a LoRaWAN Soil NPK Sensor for IoT of Agriculture. It is designed to measure the Soil Fertility Nutrient and provide a plant growing reference. The probe is IP68 waterproof and can be buried into soil for long term use.
LSNPK01 detects soil's Nitrogen, Phosphorus, and Potassium use TDR method, and uploads these values via wireless to LoRaWAN IoT Server.
The LoRa wireless technology used in LSNPK01 allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
LSNPK01 is powered by 8500mAh Li-SOCI2 battery, it is designed for long term use up to 5 years.
Each LSNPK01 is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
LoRaWAN 1.0.3 Class A
Ultra-low power consumption
Monitor Soil Nitrogen
Monitor Soil Phosphorus
Monitor Soil Potassium
Monitor Battery Level
Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
AT Commands to change parameters
Uplink on periodically
Downlink to change configure
IP66 Waterproof Enclosure
IP68 rate for the Sensor Probe
8500mAh Battery for long term use
1* LSNPK01 Soil NPK Sensor
Dimension and Weight:
Package:
Size: 195 x 125 x 55 mm
Weight: 420g
LSNPK01-XXX
XXX: the default frequency band
EU433: Default frequency band EU433
CN470: Default frequency band CN470
EU868: Default frequency band EU868
IN865: Default frequency band IN865
KR920: Default frequency band KR920
AS923: Default frequency band AS923
AU915: Default frequency band AU915
US915: Default frequency band US915
Reference: DWM18110501
LG308 8 Channels Indoor LoRaWAN Pico Gateway is an open source LoRaWAN Pico Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular.
Reference: DWM19090402
The LPS8 is an open source LoRaWAN Gateway Build in SX1308 and SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM20061501
The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.
Reference: DWM20072901
The DLOS8 Outdoor LoRaWAN Gateway includes 1pcs SX1301 and 2pcs SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: ODL25030202
PS-NB-I with an Immersion Installation Type Air /Water Pressure Sensor that can measure Air, Water pressure, and liquid levels and upload the sensor data via wireless to the NB-IOT server.
Reference: ODL22082508
Ultrasonic Sensors A01A-15,A02-15,A13-15,A16-15 for LDDS04 LoRaWAN 4 channels sensor node.
Reference: DWM20072901
The DLOS8 Outdoor LoRaWAN Gateway includes 1pcs SX1301 and 2pcs SX1257 LoRa Tranceiver which provide 10 programmable parallel demodulation paths.
Reference: DWM18102802
USD25/pcs MOQ100 The 433MHz /868MHz /915MHz Arduino LoRa Shield is a long range transceiver on a Arduino shield form factor and based on Open source library.Compatible with Arduino Leonardo, Uno, Mega, DUE.
Reference: ODL25011502
D22-NB is an NB-IoT Temperature Sensor that supports two Temperature Sensor probes that support BLE configuration and OTA updates to convert the Temperature reading to upload the sensor data sent to the IoT platform via the NB-IoT network.
Reference: ODL22100701
The LoRa IoT Kit v3 can be used to evaluate the multi-channel LoRaWAN solution and single-channel private LoRa solution. Users can also use LoRa IoT Kit v3 to test different network structure solutions and find the best for their IoT solution.
Reference: ODL25022101
The DDS75-NB is an NB-IoT Distance Detection Sensor that detects the distance between the measured object and the sensor and sends the IoT platform via the NB-IoT network.
Reference: ODL23100701
LG01v2 uses Open Source Linux system design for peer to peer single channel LoRa protocol instead of LoRaWAN protocol,lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet or Cellular Network (via Optional 4G module).
Reference: ODL23103102
The RS485-LB is a RS485 / UART to LoRaWAN Converter for Internet of Things solutions. User can connect RS485 or UART sensor to RS485-LB converter, and configure RS485-LB to periodically read sensor data and upload via LoRaWAN network to IoT server.
Reference: DWM16092702
The Lora/GPS_HAT is an expension module for LoRaWan for using with the Raspberry Pi.This product is intended for those interested in developing LoRaWAN solutions which is based on the SX1276/SX1278 transceiver.
Reference: DWM19090403
The PG1301 build by SX1301 and SX1257 which is The 10 channels - LoRaWAN GPS Concentrator for Raspberry Pi can connect to 5000 nodes.
Reference: ODL25011302
WSS-08 Optical Rain Guage The Optical Rain Guage for the WSC2-L Weather Station Kit is a weather monitor instrument to monitor rainfall.
Reference: DWM17111105
OV1 WIFi Outdoor IoT Appliance is an VoIP appliance designed for transfer the Voice over long distance WiFi connection.
Reference: DWM21072702
The N95S31B SHT31 NB-IoT Outdoor Temperature and Humidity Sensor be used to measure the surrounding environment temperature and relative air humidity for IoT solution.
Reference: ODL24082701
ES-261520 3.6V 8500mAh Li/ SOCI2 Battery for Dragino IOT sensor nodes like the SN50-V3, SN50v3-D20, DDS75-LB, SE01-LB,20, SN50-LB-S31 ext.
Reference: DWM25022702
The MDS120-NB is an NB-IoT Microwave Radar Distance Sensor that uses Microwave Radar to detect the distance between the sensor and different objects supports uplink methods including MQTT, MQTTs, UDP & TCP for different application requirements, and uplinks to various IoT Servers.
The LSNPK01 is a LoRaWAN Soil NPK Sensor for IoT of Agriculturebase. detects soil's Nitrogen, Phosphorus, and Potassium use TDR method, and uploads these values via wireless to LoRaWAN IoT Server.