Reference: DWM18051402

Brand: Semtech

HPD14A SX1278 433MHz /470MHz LoRa Wireless transceiver module

HPD14A SX1278 433MHz /470MHz LoRa Wireless transceiver module feature the LoRaTM long range modem It's from the HopeRF LoRa module.build by the semtech chipset with the application for ARM meters.

Reference: DWM21010102

BCN01 BLE iBeacon designed for indoor positioning solution

BCN01 is designed for the use together with LBT1 LoRaWAN Indoor Position Solution base on  NORDIC NRF52832 IC and support Bluetooth 4.2 protocol.

Reference: DWM18101201

OLG02 Outdoor Dual Channels LoRa IoT Gateway

The OLG02 is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 3G or 4G cellular. 

Reference: ODL22082511

Dragino CPL01 Outdoor LoRaWAN Open/ Close dry Contact sensor node

The Dragino CPL01 is a LoRaWAN Contact Sensor. It detects open/close status and uplinks to IoT server via LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.

Reference: ODL23091201

SW3L-LB LoRaWAN Outdoor water Flow Sensor

The SW3L-LB is a new LoRaWAN Outdoor water Flow Sensor supports BLE configure and wireless OTA update which use to detects water flow volume and uplink to IoT server via LoRaWAN network it can be used at indoor and outdoor use.

Reference: DWM20061501

Dragino LSE01 LoRaWAN Soil Moisture & EC Sensor Sensor Nodes base on the LSN50-V2

The Dragino LSE01 is a LoRaWAN Soil Moisture & EC Sensor for IoT of Agriculture. It detects Soil Moisture, Soil Temperature and Soil Conductivity, and upload the value via wireless to LoRaWAN IoT Server.

Reference: DWM21031501

LAQ4 LoRaWAN TVOC and eCO2 Temperature & Humidity Air Quality Sensor Nodes

LAQ4 is a LoRaWAN end sensor nodes designed to measure the surrounding environment parameters include: TVOC(Total Volatile Organic Compound), eCO2(equivalent CO2), temperature and relative air humidity.

Reference: ODL23092703

LSN50V3 S31B-LB LoRaWAN Temperature & Humidity Sensor

S31B-LB is a LoRaWAN Temperature and Humidity Sensor with a SHT31 sensor probe  based SN50v3-LB or LSN50V3 supports BLE configure and wireless OTA update.

Reference: DWM21072702

Dragino LSN50V2-S31B SHT31 LoRaWAN Temperature & Humidity Sensor node

The LSN50V2-S31B is LoRaWAN Temperature & Humidity Sensor node be used to measure the surrounding environment temperature and relative air humidity  for  IoT solution.

Reference: DWM18073001

LG02-P an open source 4G Dual Channels LoRa IoT Gateway

LG02-P is an open source dual channels LoRa Gateway. It lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet, 4G cellular. 

Reference: ODL23091205

WL03A-LB LoRaWAN None-Position Rope Type Water Leak Controller

WL03A-LB is a New LoRaWAN Water Leak Controller which supports BLE configure and wireless OTA update use a sensitivity Water Leak Cable on the ground to detect water leakage. 

Reference: ODL22071403

GroPoint Air - LoRaWAN Multi Segment Soil Sensor Converter

The GroPoint is a LoRaWAN Multi Soil Segment Converter It is designed to connect to GroPoint Profile Multi-depth Soil moisture and temperature profile Sensor for IoT of Agriculture.

Reference: DWM21010101

LBT1 LoRaWAN Bluetooth Indoor location Tracker

LBT1 is a Long Range / low power consumption LoRaWAN Bluetooth tracker. LBT1 scans and find the nearest i-Beacon info and send to IoT server via LoRaWAN wireless network. 

Reference: DWM20060201

IoT Wireless ear tag sensor for dairy farm Management

The IoT Wireless ear tag sensor build by BDDBTECH offers a completed solution for the dairy farm Management system.  

Reference: DWM21030101

LIG16 Indoor LoRaWAN Gateway Build in SX1302 and SX1250 LoRa Tranceiver

LIG16 Indoor LoRaWAN Gateway Build in SX1302 and SX1250 LoRa Tranceiver this gateway with lower current consumption and higher amount of traffic than preceding devices.

Reference: ODL24062202

LG01-V2 open-source single channel LoRa IOT Gateway

LG01v2 uses Open Source Linux system design for peer to peer single channel LoRa protocol instead of LoRaWAN protocol,lets you bridge LoRa wireless network to an IP network via WiFi, Ethernet or Cellular Network (via Optional 4G module).