Descriptions
The RFM119W is a high performance, highly flexible, low-cost, single-chip (G)FSK/OOK transmitter for various,240 to 960 MHz wireless applications. It is a part of the HOPERF NextGenRFTM family, which includes a complete line of transmitters, receivers and transceivers. The RFM119/S provides the simplest way to control the data transmission. The transmission is started when an effective level turnover is detected on the DATA pin, while the transmission action will stop after the DATA pin holding level low for a defined time window, or after a two-wire interface (TWI) command is issued. The chip features can be configured in two different ways: setting the configuration registers through the TWI, or programming the embedded RFPDK. The device operates from a supply voltage of 1.8V to 3.6 V, consumes 27.6 mA (FSK @ 868.35 MHz) when transmitting +10 dBm output power, and only leak 20 nA when it is in sleep state. The RFM119W-RFM119SW transmitter together with the CMT2219A receiver enables a robust RF link.
Features
Embedded EEPROM
Very Easy Development with RFPDK
All Features Programmable
Frequency Range: 240 to 960 MHz
FSK, GFSK and OOK Modulation
Symbol Rate:
0.5 to 30 ksps (OOK)
0.5 to 100 ksps (FSK/GFSK)
Deviation: 1.0 to 200 kHz
Two-wire Interface for Registers Accessing and
EEPROM Programming
Output Power: -10 to +13 dBm
Supply Voltage: 1.8 to 3.6 V
Sleep Current: < 20 nA
FCC/ETSI Compliant
RoHS Compliant
Module Size:
17.8*12.8*5.0mm (RFM119W)
16*16*5.0mm (RFM119SW)
Applications
Low-Cost Consumer Electronics Applications
Home and Building Automation
Infrared Receiver Replacements
Industrial Monitoring and Controls
Remote Automated Meter Reading
Remote Lighting Control
Wireless Alarm and Security Systems
Remote Keyless Entry (RKE)
Usefull link:
Datasheet: RFM119SW. RFM119W Datasheet
