- On sale!

Reference: DWM14042301
Spring antenna is specialized for wireless data transmission. This antenna with good performance of V.S.W.R, small size design, easily installation, stable performance and good anti-shock and anti-aged compatible for Hoperf Modules.
Reference: DWM14032902
SMA rf antenna connector is pallets copper gold andexternal thread needle sma pallets plate rf connector.
Reference: DWM14032102
Whip antenna for sub-1 GHz, 433MHz,868MHz and 915MHz with SMA male connectors.it's used with wireless module recommanded by Hoperf .
Reference: DWM14042401
SMA RG178 extension female cable for GPS, GSM antenna,RF module, SMA cable,IPEX to SMA jumper cable.
Reference: DWM18032302
USD3.0/pcs MOQ100pcs LoRa Antenna designed for Lora application which required for outdoor waterproof highgain and work at ISM free band like 433MHz /868MHz /915MHz SMA Male Whip antenna.
Reference: DWM16121503
DWM-TLB-3.0QB SUB-1GHz / 2.4GHz Whip antenna with a Collapsible SMA male connectors.Which are available for 433MHz,868MHz.915MHz and 2.4GHz..
Reference: DWM15101001
Brand: Semtech
RFM50 module series’ design is based on the high performance RF50 SoC chip, It include a CIP-51 core‘ MCU and 100mW transceiver. It operate at 433/470/868/915 MHz ISM band, comply with FCC, ETSI regulation.
Reference: DWM15010504
Brand: Semtech
The RFM69CW /RFM69HCW are built in by SX1231and SX1231H which is ISM Free band transceiver module capable of operation over a wide frequency range, including the 433MHz,868MHz and 915MHz.
HC-SR501 is Adjust IR Pyroelectric Infrared PIR module Motion Sensor Detector Module for arduino.
This PIR sensor is arduino compatible.
PIR motion sensor module, Max detection distance is 7 meters. If anyone moved in that range, Alarm pin will go high. The signal duration can be adjusted from 0.3s-18s by the yellow potensiometer.
Infrared sensor with control circuit board
The sensitivity and holding time can be adjusted
Features:
Detecting Range: Approx. 7m / 23 feet
Detecting Angle: Less than 100 degrees
Working Voltage Range: DC 5V- 20V
Quiescent Current: Less than 50uA
Level Output Voltage: High 3V / Low 0V
Working Temperature: -15 to +70 degrees C
Trigger Method: L unrepeatable trigger / H repeatable trigger
PCB Size: Approx. 32mm x 24mm / 1.3 x 0.9 inch
Reference: DWM14032106
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328.
Reference: DWM14051501
Mega 2560 R3, Mega2560 REV3 ATmega2560-16AU Board + USB Cable compatible for arduino.
Reference: DWM14092801
DWM-PM-2 Mini Infrared PIR module PIR motion sensor module with LDR work mode.
Reference: DWM15101101
The E931.96 is an ultra-low power motion detector controller integrated circuit. The device is ideally suited for battery operated wireless motion sensors that make use of an MCU for handling com munication.
Reference: DWM14092801
DWM-PM-2 Mini Infrared PIR module PIR motion sensor module with LDR work mode.
Reference: DWM17031001
DWM-PM-8 50uA Lowest standby Current 0.18s to 300s Delay Time Mini Infrared PIR module with LDR work mode.
Reference: DWM15101101
The E931.96 is an ultra-low power motion detector controller integrated circuit. The device is ideally suited for battery operated wireless motion sensors that make use of an MCU for handling com munication.
Reference: DWM17020801
DWM-PM-6 20uA Lowest standby Current 1.8s to 1Hour Delay Time Mini Infrared PIR module with LDR work mode.
Reference: DWM20041502
M5StickC PIR Hat detect the infrared come from the human body.
HC-SR501 is Adjust IR Pyroelectric Infrared PIR module Motion Sensor Detector Module for arduino.